Ultrasound
The multifrequency ultrasound in class E

FISIOSONIC^® the multifrequency ultrasound in class E

FISIOSONIC^® is a new device for ultrasound therapy, using an innovative output stage called class E. The mechanical efficiency obtained through the output stage in class E is decidedly higher than the one that can be obtained by means of traditional output stages and allows the operator to issue high powers on the patient in a constant and controlled way in relation to impedance of the tissues and with a limited thermal effect.

FISIOSONIC^®is a last generation ultrasound device that uses 1-3MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment. Besides traditional methods, FISIOSONIC^® has introduced two innovative functions: sequential treatment and automatic frequency switching.

The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.

Indications: EPICONDYLITIS MUSCULAR LESIONS IMPINGEMENT SYNDROME TENDINITIS FIBROUS ADHESIONS FIBROMYALGIA MUSCULAR TENSIONS MUSCLES CONTRACTURES ACTIVE HYPERAEMIA

The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action. The applicators are waterproof for underwater treatments.

The instrument can be operated in two modes: continuous and pulsed. The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm² a 3 W/cm².

FISIOSONIC^® is equipped with self-calibration system and visual and sound contact control system. The appliance is equipped with an inlet for electrotherapy appliance connection (Modulo series); the operator can then carry out a combined therapy with any applicator.

FISIOSONIC^®is equipped with a library of preset therapeutic protocols focused on severe and chronic pathologies. It provides the operator the option to create customized programs for a patient and indicated for speciﬁc pathologies or areas to be treated, for rapid and eﬃcient therapies. The user interface, equipped with keyboard and graphic display, has a decidedly modern and professional look.

FISIOSONIC® Veterinary display touch screen

Available also in touch screen version

The interface of FISIOSONIC^® in touch-screen version displays the parameters on a large color display that allows to remotely read and gives to the operator the possibility to select, modify and keep always under control the functions and the working parameters.

A unique feature of FISIOSONIC^®touch-screen version is the Wizard, a step-by-step digital guide to use the device. Thanks to an intuitive software, the Wizard leads the operator in selecting the therapeutic preset protocols focused on severe and chronic pathologies.